3dfx Archive - Quantum3D Obsidian2 90 maximum resolution

RaverX

God Member

Offline

Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male

Quantum3D Obsidian2 90 maximum resolution
21.12.08 at 15:07:35

I think many users of this forum know the card. It's this one : http://tdfx.de/eng/obsidian2_90-2440.shtml. Well, the card has 10 mb of memory, but in UT I can only set 512x384 resolution, anything above will revert to that resolution.

Even the V2 with 8 MB knows 800x600, heck, even the lowly V1 4 MB knows 640x480. Is the memory for frame buffer on the Obsidian2 90 smaller than 2 MB or what ?

Back to top

IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: Quantum3D Obsidian2 90 maximum resolution Reply #1 - 21.12.08 at 15:18:04 no its 2MB, enough for 640x480 my green card have SiliconMagic Memory with marking ...256k16... so its 100% 512kilobyte Chips in the control panel i can set up to 640x480 @120Hz at the glide test
Back to top	IP Logged

RaverX God Member Offline Voodoo2 fan Posts: 533 Oradea, Romania Gender:	Re: Quantum3D Obsidian2 90 maximum resolution Reply #2 - 21.12.08 at 19:09:03 That's what I thought, it should have 2 MB, but UT don't seem to care much, 512x384 is max with Obsidian2 90. Oh well...
Back to top	IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: Quantum3D Obsidian2 90 maximum resolution Reply #3 - 21.12.08 at 19:42:03 and in other 3D Games? and the control panel test i will test it.....
Back to top	« Last Edit: 21.12.08 at 20:06:50 by exxe » IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Quantum3D Obsidian2 90 maximum resolution Reply #4 - 21.12.08 at 21:43:47 640 x 480 should not be a problem, sounds like it is defaulting to the minimum spec for some reason. What driver and OS?
Back to top	Rampage is alive! IP Logged

RaverX God Member Offline Voodoo2 fan Posts: 533 Oradea, Romania Gender:	Re: Quantum3D Obsidian2 90 maximum resolution Reply #5 - 21.12.08 at 23:52:08 Driver : Quantum3D Obsidian2 90/200SB V5.5P OS : Windows 98 SE I'll try it in other games and see...
Back to top	IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: Quantum3D Obsidian2 90 maximum resolution Reply #6 - 21.12.08 at 23:58:34 test ut todayis nothing have problems with my test system i use the Ob2_6cf_9x.exe
Back to top	IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Quantum3D Obsidian2 90 maximum resolution Reply #7 - 22.12.08 at 03:24:35 exxe wrote on 21.12.08 at 23:58:34: test ut todayis nothing have problems with my test system i use the Ob2_6cf_9x.exe Try using the 3dfx Voodoo II driver, should be fully supported.
Back to top	Rampage is alive! IP Logged

gamma742

God Member

Offline

3Dfx Gamer

Posts: 1668
San Diego, CA USA
Gender: male

Re: Quantum3D Obsidian2 90 maximum resolution
Reply #8 - 22.12.08 at 04:22:02

I had the same problem with mine. Actually both of them, the Black and the Green one. I ended up selling both of them. I didn't have a back plate for either one and as I recall, there was no 2D input, only a 3D output and didn't want to have to move the monitor cable back and forth.

It's fine as a collector card but that's about it.

Back to top

Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...

IP Logged

RaVeNsClaw

YaBB Newbies

Offline

Posts: 47
Germany
Gender: male

Re: Quantum3D Obsidian2 90 maximum resolution
Reply #9 - 22.12.08 at 11:41:14

I've tested mine with the fastvoodoo driver.
Worked fine for me with 640*480!

But I know that problem, I had it with my Gamewizard V2 in a normal computer.
The driver had a problem with detecting the card, so I had to add higher resolutions in the registry.

I don't remember exactly, but start searching here:
HKLM\SOFTWARE\"3dfx Interactive"\Voodoo2

There must be something with the resolutions as the names and the refresh rates as the values (decimal!) .
If there is only 512*384, you have to add 640*480 and the value has to be the refresh rate.

I hope my expression is not to ungrammatical! Wink

Back to top

I'm sorry for my bad English! ;-D

IP Logged

RaverX

God Member

Offline

Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male

Re: Quantum3D Obsidian2 90 maximum resolution
Reply #10 - 22.12.08 at 13:40:52

gamma742 wrote on 22.12.08 at 04:22:02:

I had the same problem with mine. Actually both of them, the Black and the Green one. I ended up selling both of them. I didn't have a back plate for either one and as I recall, there was no 2D input, only a 3D output and didn't want to have to move the monitor cable back and forth.

It's fine as a collector card but that's about it.

Well, if you have a monitor with at least 2 video inputs, the lack of 2D input it's not an issue anymore.

And yes, it's a nice collector item, only if I could find a black one now...

RaVeNsClaw, thanks, I'll try that.

Back to top

IP Logged

exxe

God Member

Offline

^^

Posts: 1316
germany

Re: Quantum3D Obsidian2 90 maximum resolution
Reply #11 - 24.12.08 at 12:24:33

so
i test it and it works on 640x480

format C:
install windows 98
install Q3D drivers, Ob2_6cf_9x.exe
install UT, the version from the v3 AGP (build400)

i can chose AND USE 512x384 and 640x480
if i chose 800x600 or more it drops to 512x384

Asus P2B-B
Pentium3 800MHz
384MB PC100 SD-RAM
ATI Rage Pro
Creative SB AWE64 Gold (4390)

Back to top

IP Logged

Thandor Full Member Offline What's the fuzz all about? Posts: 227	Re: Quantum3D Obsidian2 90 maximum resolution Reply #12 - 28.12.08 at 22:21:32 I tested the card here, too. It runs great using the latest 3dfx Voodoo2 V3.02.02 driver on Windows '98 SE. Both 512x384 and 640x480 resolutions. The board has 2MB framebuffer and 8MB texture memory and performs just like a regular Voodoo II .
Back to top	« Last Edit: 28.12.08 at 22:21:59 by Thandor » Click here to see my collection of CPU's and GPU's! IP Logged

RaverX God Member Offline Voodoo2 fan Posts: 533 Oradea, Romania Gender:	Re: Quantum3D Obsidian2 90 maximum resolution Reply #13 - 28.12.08 at 23:49:39 OK, I'll try to install the V2 driver and see, but I thought Obsidian drivers are better optimized...
Back to top	IP Logged

Thandor

Full Member

Offline

What's the fuzz all about?

Posts: 227

Re: Quantum3D Obsidian2 90 maximum resolution
Reply #14 - 29.12.08 at 01:40:49

I have no idea if they are better, and if they are, in which way

. The Obsidian appears to be a (quite) normal/regular Voodoo2 board aside from the missing D-SUB and the somewhat weird RAM configuration. Basically the chipset is still the same so I think the 3dfx driver might actually be better as they are newer and more optimized for games. Meaning; in a normal PC with normal games it might run better with the latest 3dfx reference (or perhaps FastVoodoo) drivers.

Performance of the board is comparable with normal V2 8MB and V2 12MB using latest 3dfx reference driver. Except for 3DMark2000, the V2 8MB is ~250 points ahead, the V2 12MB about 430. Benchmarks run with Pentium III-S 1400MHz (Tualatin; 512KB L2).

Back to top

Click here to see my collection of CPU's and GPU's!

IP Logged

	Welcome, Guest. Please Login