Hi,

Everybody know that for the 3dfx cards the recent and best modern mobo is the KT333.
Since a few days i`m surfing on the net in order to find a better mobo. To pity that i did not find one.....
I do have 2 questions:
1. Know somebody a chipset list on the internet with all the existing chipset and theyr specification ?
2. It is possible to change the Mobo in order to work with AGP2x ? It´s there a mod that can be done to the mobo ?

Br.
Radu.

I think that in order for a motherboard to change voltage for agp port, you'd either need to set the voltage in bios to 3.3V, but I don't think that would work.

Other would be to change chipset, but that's impossible. :)

Well, i`m not sure, but i think that on the market exist a lot of chipset that can still work with 3.3V , but because of the marketing rules, they are limited.
Such a chipset, once found, can be modded for 3dfx cards.
The only chipset list that i found is this:
http://www.ybet.be/en-hardware/chipset-pc.htm

Some Mobo allow to rise the AGP Voltage .
If we rise the AGP Voltage to approx. 3.3V and put in the AGP Slot an 3dfx card......theoreticaly should work..or ?

Radu.

wrote on 29.04.07 at 21:09:22:

[...] 1. Know somebody a chipset list on the internet with all the existing chipset and theyr specification ? [...]

Take a look at this site:
http://www.playtool.com/pages/agpcompat/agp.html
Alot of info's about many, many, chipsets and theyr AGP capabilities... Just scrool down on the page.
Good luck