3dfx Archive - 3dHQ V1.09.00 Beta6 online

24.04.17 at 02:13:28

	Welcome, Guest. Please Login
	News: Forum Registration Status : Closed

Home

Help

3dfx Archive › 3dfx Section › 3dfx Drivers › 3dHQ V1.09.00 Beta6 online

(Moderators: NitroX infinity, gdonovan, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1

3dHQ V1.09.00 Beta6 online (Read 367 times)

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2453 5335N 00745E Gender:	3dHQ V1.09.00 Beta6 online 12.11.02 at 19:14:19 Since I know many are eager to test, those are going online as I write this... To my understanding, it is useful for the Voodoo3 to Voodoo5 range (I don't know for sure though) , although emphasis is probably on Voodoo4/5.
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

procerus

Full Member

Offline

Voodoo2 Monomaniac

Posts: 189

Re: 3dHQ V1.09.00 Beta6 online
Reply #1 - 12.11.02 at 20:44:04

And Windows 2000 and XP only.

Apparently DirectX 8.1b update is vital. Instructions for installing are apparently critical to the proper functioning of these drivers.

Quote:

1. install service pack 1
2. remove the 3dfxvs entry in the registry
3. install directx8.1 redist
4. install driver
5. enjoy

The driver team are also stressing that these are still beta and they would appreciate feedback.

98lite with

629K

of free conventional memory in full DOS mode using QEMM 9.0 (or 628K with UMBPCI.SYS providing real mode for FastVid) with SmartDrive, CD-ROM, CuteMouse, sound support and UniRefresh all loaded high.

IP Logged

FalconFly

YaBB Administrator

Offline

3dfx Archivist

Posts: 2453
5335N 00745E
Gender: male

Re: 3dHQ V1.09.00 Beta6 online
Reply #2 - 12.11.02 at 20:49:26

Well, looks like I have to add above critical points to the File, otherwise people will go haywire over it Grin

I also just looked at the contained ReadMe, and found this :

Upgrade Existing Voodoo Drivers
--------------------------------
1) Start Windows 9x/ ME Roll Eyes

Well, still Beta; with the added steps, should work out better I hope.

WebMaster FalconFly Central 3dfx Archive

IP Logged

Nagual YaBB Newbies Offline Searching for the perfect driver ! Posts: 12 Rio de Janeiro - BR Gender:	Re: 3dHQ V1.09.00 Beta6 online Reply #3 - 14.11.02 at 20:46:19 Well, it's my first post here so I woul'd like to compliment all of you for keeping this site. Now, one question: There are also new (11/12/02) self-stracting Beta5 drivers, all flavors, at www.voodoofiles.com. ; What are the diferences between them and the Beta6 ? If is there any. Best regards!
Back to top	Athlon TB 1700+@2011Mhz/Zalman CNPS6000/Abit NF7-S 2.0/Maxxtro 500(?)Watts/2x256MB DDR400/ATI Radeon 9550 256MB/Seagate Barracuda 80GB/Audigy SE /WinXP-Pro SP1 IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2453 5335N 00745E Gender:	Re: 3dHQ V1.09.00 Beta6 online Reply #4 - 14.11.02 at 21:57:14 Well... The Beta6 is the only one I know to be released under the 3dHQ logo. All other "Variants" are likely spin-off's, possibly using earlier Beta components, or are simply re-mixed by 3rd party. Of course, feel free to test those, but remember everything that goes by voodoofiles is completely untested and unconfirmed
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

Nagual YaBB Newbies Offline Searching for the perfect driver ! Posts: 12 Rio de Janeiro - BR Gender:	Re: 3dHQ V1.09.00 Beta6 online Reply #5 - 15.11.02 at 01:58:27 All right, so there wasn't an "retail" Beta5 ? ??? Thanks!
Back to top	Athlon TB 1700+@2011Mhz/Zalman CNPS6000/Abit NF7-S 2.0/Maxxtro 500(?)Watts/2x256MB DDR400/ATI Radeon 9550 256MB/Seagate Barracuda 80GB/Audigy SE /WinXP-Pro SP1 IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page