3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl General Section >> General Discussion >> Clock rate for a 200Sbi? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1122915378 Message started by TM30 on 01.08.05 at 18:56:18

Title: Clock rate for a 200Sbi?
Post by TM30 on 01.08.05 at 18:56:18

Can you tell me the clocks for a 200SBi with 125Mhz RAM? How much Mhz on GPU and RAM?

http://www.thedodgegarage.com/3dfx/q3d_mercury/q3d_merc_200sbi_card.jpg

EDIT- No direct linking to my site.

edit by me... sorry gary, will never do it again...

Title: Re: Clock rate for a 200Sbi?
Post by gamma742 on 01.08.05 at 18:59:13

With the Q3D drivers it is 93MHz

Title: Re: Clock rate for a 200Sbi?
Post by TM30 on 01.08.05 at 19:16:56

ahh and why did they put 125Mhz RAM on it? Is it more OCable than the version with 100Mhz RAM? Did some1 test it?

Title: Re: Clock rate for a 200Sbi?
Post by gamma742 on 01.08.05 at 19:41:39

I haven't tried O.C.ing mine. These have a heatsink on the front and back, the 100MHz version ones (Black) don't.

Was that you that one that card earlier today?

Title: Re: Clock rate for a 200Sbi?
Post by LuxKiller65 on 01.08.05 at 19:47:09

wrote on 01.08.05 at 18:56:18:

EDIT- No direct linking to my site.

:-/

Title: Re: Clock rate for a 200Sbi?
Post by TM30 on 01.08.05 at 21:42:14

wrote on 01.08.05 at 19:47:09:

:-/

yeah yeah its okay. traffic costs money (in some cases... you'll always find free traffic with no ads...) so i can understand him.

@gamma

yeah i grabbed it. was a nice deal i think. it was even boxed and fully retail...

Title: Re: Clock rate for a 200Sbi?
Post by OutOfRange on 02.08.05 at 01:29:30

ehm sry about my sensless post... but i still see a link to the dodgegarage page after the edit ???

if it's possible: you can always use pictures of the www.3dfx.ch/gallery if the author alows you to do that with his pictures. we don't have any bandwith limits on our gallery ;)

Title: Re: Clock rate for a 200Sbi?
Post by gdonovan on 02.08.05 at 02:29:36

wrote on 02.08.05 at 01:29:30:

ehm sry about my sensless post... but i still see a link to the dodgegarage page after the edit ???

Yes, I was being polite and left the link but not the image.

If the image is left it creates traffic everything this page is refreshed or brought up. If the link is there, only if someone clicks on it does it create traffic.

Title: Re: Clock rate for a 200Sbi?
Post by TM30 on 02.08.05 at 18:20:07

nevermind. i will soon make own images of that card 8)

Title: Re: Clock rate for a 200Sbi?
Post by edmundoab on 03.08.05 at 16:11:13

the green one with the long heatsink is 125Mhz mem

while the black one, older version has 100 Mhz
of course those came as 4 separate squarish heatsink

TM30,
you have the green pcb i suppose?

Title: Re: Clock rate for a 200Sbi?
Post by gamma742 on 03.08.05 at 16:32:09

wrote on 03.08.05 at 16:11:13:

the green one with the long heatsink is 125Mhz mem

while the black one, older version has 100 Mhz
of course those came as 4 separate squarish heatsink

TM30,
you have the green pcb i suppose?

The "Green" 2 long heatsinks, one on the front, one on the back.

The "Black" 4 separate heatsinks on the front, none on the back.

Title: Re: Clock rate for a 200Sbi?
Post by TM30 on 03.08.05 at 17:48:42

wrote on 03.08.05 at 16:11:13:

the green one with the long heatsink is 125Mhz mem

while the black one, older version has 100 Mhz
of course those came as 4 separate squarish heatsink

TM30,
you have the green pcb i suppose?

i have the black one at home and the green one is on the way to me...

Title: Re: Clock rate for a 200Sbi?
Post by edmundoab on 04.08.05 at 08:09:38

ahh ok, so u have 2 versions!
cool

Title: Re: Clock rate for a 200Sbi?
Post by gamma742 on 04.08.05 at 19:53:44

The green one is newer,faster, and better (faster is better right). But the Black one looks cool to me as most all Quantum3d cards are Black.

Title: Re: Clock rate for a 200Sbi?
Post by Obi-Wan_Kenobi on 04.08.05 at 20:02:55

I hope it arrives this time...not like what happened to the other missing "on the way" cards :-/

Title: Re: Clock rate for a 200Sbi?
Post by TM30 on 04.08.05 at 22:23:02

i dont think that there will be problems... seller is well known "computer_md"

Title: Re: Clock rate for a 200Sbi?
Post by paulpsomiadis on 05.08.05 at 00:02:27

The only downside - as I discovered, is that the seller uses FEDEX... :(

...which means you can expect a hefty customs bill about 1 month later! >:(

I just got billed for my AGP Voodoo 2! >:(

Title: Re: Clock rate for a 200Sbi?
Post by Obi-Wan_Kenobi on 05.08.05 at 00:18:35

well afaik ... FedEX:

click to enlarge ;)
http://www.3dfx.ch/gallery/albums/album89/FedEX_low_level_flight.thumb.jpg

is one of The BEST mail delivery companies in the world, you shall be always sure that your mail get's delivered in one peace, the FedEX crew is also one of the hardest working crew for a mail order company also.

I never had problems with FedEX they really offer the best service I know.

But if FedEX isn't your type I d say go for UPS, they earn a well second place and also a very good alternative.

click to enlarge ;)
http://www.3dfx.ch/gallery/albums/album89/UPSImage.thumb.jpg

Title: Re: Clock rate for a 200Sbi?
Post by edmundoab on 05.08.05 at 08:33:19

i thought DHL is BIG in europe?
they were tied with airborne express in the US until officially being DHL in american recently

Title: Re: Clock rate for a 200Sbi?
Post by TM30 on 05.08.05 at 09:44:23

wrote on 05.08.05 at 00:02:27:

The only downside - as I discovered, is that the seller uses FEDEX... :(

...which means you can expect a hefty customs bill about 1 month later! >:(

I just got billed for my AGP Voodoo 2! >:(

no i have a delivery adress in the USA so the seller of the card will ship it to there, and my contact in the usa will ship it cheaply with usps to me...

(the seller wanted 75$ shipping to me... LoL)