Rev.A1 3300 indeed I aimed @ Sloomy's card because he's one of the few that have or had a 5500 AGP x4 in Deutschland
The top says Rev.A1 and the bottom says 3300, so you read Rev.A1 3300, anyways the most logical way to read is from top to bottom orsay from front to back
but is is quite small compaired to a 5500 AGP x2 they measure only 21.5 CM in length the same size as a Ti4600
anyway this is how I found out about that it's Sloomy's card. here is Sloomy's card and his word's:
@ obi wan
sure , here is one old shot i have taken once in a while, more photos will be taken in a few days. 
here is where I got the photo of Sloomy's card just as a proof of evidence:
http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=717&whichpage=7here TM30's card:
if you look at the PRODUCT OF MEXICO sticker, the markings are exactly the same, no difference at all, sorry but as a model maker I look at the finest detail, and also the photo you showed us is a photo of Sloomy's card from 3dfxzone.it
, the Rev.A1 3300 is alot more uncommon than the later model Rev.A2 3300 and Rev.A2 3700
. Sloomy was also one of the few that had a Rev.A1 3300 and not Rev.A2 3300 .
even the markings on the metal part that covers the molex connector are the same, in the center of that metal part there is a round hole and right to that there are some small dot like markings , even the scratches on the table on which the card is laying are placed in the same direction
, so there fore I am defintely sure this is Sloomy's card
I have Jedi Master's Vision, which is hard to underestimate.
Home
Pages: 1 
