3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Re: Empty connector on Maxigamer 3D http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1116964674 Message started by NitroX infinity on 25.05.05 at 12:02:52 |
Title: Re: Empty connector on Maxigamer 3D Post by NitroX infinity on 25.05.05 at 12:02:52
Perhaps 'would-be' connections for a 2D daughterboard?
|
Title: Re: Empty connector on Maxigamer 3D Post by Eye-Q on 25.05.05 at 13:08:01
There is another empty connector beneath the RAMDAC, it's exactly opposite to the addressed empty connector, maybe they belong together and they were intended for a 2D-Daughterboard as NitroX infinity stated.
|
Title: Re: Empty connector on Maxigamer 3D Post by paulpsomiadis on 25.05.05 at 17:24:44
Or maybe for a TV-OUT module like on the Voodoo Rush... ???
|
Title: Re: Empty connector on Maxigamer 3D Post by gamma742 on 26.05.05 at 03:46:49 Quote:
You have all heard of SwapLock/SyncLock.?.? If not, check out the connectors on my V1 Q3D 100SB or my V2 Q3D 200SBi in my signature file below |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |