3dfx Archive - Miro Highscore Loop-cable Pinout

RaVeNsClaw YaBB Newbies Offline Posts: 47 Germany Gender:	Miro Highscore Loop-cable Pinout 20.08.08 at 22:29:11 I've got 2 Miro Highscore cards, but I don't have the loop-cable. Does anyone have the wiring diagram for this cable, or the pinout of the vga-in connector on the miro card? I've got also the Skywell 8MB Voodoo, but I really want to get those cards working...
Back to top	I'm sorry for my bad English! ;-D IP Logged

RaVeNsClaw YaBB Newbies Offline Posts: 47 Germany Gender:	Re: Miro Highscore Loop-cable Pinout Reply #1 - 26.08.08 at 12:26:29 Has really nobody that Pinout? Witch transistor on the Voodoo is switching between the 2d graphics-board and the Voodoo? Would it be possible to use the Card like those Quantum3D Voodoo2's witch have no loop-input? My Screen has got 2 VGA Ports...
Back to top	I'm sorry for my bad English! ;-D IP Logged

Tritop Full Member Offline «» 3dfx Collector «» Posts: 175	Re: Miro Highscore Loop-cable Pinout Reply #2 - 26.08.08 at 12:29:56 Talk to Maik! He helped me too! http://www.mirosupport.de/
Back to top	IP Logged

RaverX

God Member

Offline

Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male

Re: Miro Highscore Loop-cable Pinout
Reply #3 - 26.08.08 at 13:48:13

RaVeNsClaw wrote on 26.08.08 at 12:26:29:

Witch transistor on the Voodoo is switching between the 2d graphics-board and the Voodoo?

Would it be possible to use the Card like those Quantum3D Voodoo2's witch have no loop-input? My Screen has got 2 VGA Ports...

3dfx Voodoo1 and Voodoo2 don't use a switch, they are used when a 3D game use them, so you can link one VGA port to the primary graphic card and the other VGA port to the Voodoo card and when you start a game just switch between imputs from the monitor.

Back to top

IP Logged

RaVeNsClaw YaBB Newbies Offline Posts: 47 Germany Gender:	Re: Miro Highscore Loop-cable Pinout Reply #4 - 26.08.08 at 22:29:36 Oh! That's what I wanted to hear! Thanks a lot! I'll test it tomorrow!
Back to top	I'm sorry for my bad English! ;-D IP Logged

Tritop Full Member Offline «» 3dfx Collector «» Posts: 175	Re: Miro Highscore Loop-cable Pinout Reply #5 - 27.08.08 at 05:04:40 I wonder if the Hiscore 1 Cable works on a Hiscore 2 because I recently bought one with 12MB
Back to top	IP Logged

RaverX God Member Offline Voodoo2 fan Posts: 533 Oradea, Romania Gender:	Re: Miro Highscore Loop-cable Pinout Reply #6 - 27.08.08 at 08:59:34 Tritop wrote on 27.08.08 at 05:04:40: I wonder if the Hiscore 1 Cable works on a Hiscore 2 because I recently bought one with 12MB Yes, it works, even more, it works with the canopus pure 3d and pure 3d II. So that one cable is compatible with miro v1,v2 and canopus v1,v2.
Back to top	IP Logged

Tritop Full Member Offline «» 3dfx Collector «» Posts: 175	Re: Miro Highscore Loop-cable Pinout Reply #7 - 27.08.08 at 23:04:26 Perfect! I will dismantle it (because I don´t have a pinout) and make 5 or so cables, to have enough spare
Back to top	IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: Miro Highscore Loop-cable Pinout Reply #8 - 28.08.08 at 19:04:24 Use a multimeter with "continuity check" setting (the BEEP setting). Then you can check the cable WITHOUT ripping it apart.
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

Tritop Full Member Offline «» 3dfx Collector «» Posts: 175	Re: Miro Highscore Loop-cable Pinout Reply #9 - 31.08.08 at 23:48:32 Ok! Thanks!
Back to top	IP Logged

	Welcome, Guest. Please Login