3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Screen corruption artifacts at 1600x1200 in Glide mode with V5 http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1231312345 Message started by SonicIce on 07.01.09 at 09:12:25 |
Title: Screen corruption artifacts at 1600x1200 in Glide mode with V5 Post by SonicIce on 07.01.09 at 09:12:25
I just got a Voodoo 5 5500. I installed the latest official 3Dfx drivers. Whenever I set the resolution to 1600x1200 in a Glide game, my screen fills with these horizontal lines. It doesn't do it on a lower resolution. It doesn't do it on the desktop or in Direct3D mode.
Here is an image of the screen: http://jord.nm.ru/corruptscreen.jpg Image of my card for any reason: http://jord.nm.ru/v5_5500.jpg Do you think it is a driver issue or is there something wrong with my card? The system: Win98 P3-933MHz 256MB RAM Thank you. |
Title: Re: Screen corruption artifacts at 1600x1200 in Glide mode with Post by ps47 on 07.01.09 at 21:30:06
I would try some 3rdparty glides,the ones koolsmoky made are pretty good: http://www.3dfxzone.it/koolsmoky/files/glide20030211.zip
|
Title: Re: Screen corruption artifacts at 1600x1200 in Glide mode with Post by SonicIce on 08.01.09 at 04:30:45
I just take that and put them in Windows/System and replace whats there? I tried that and it didn't fix the problem :(
|
Title: Re: Screen corruption artifacts at 1600x1200 in Glide mode with Post by ps47 on 08.01.09 at 10:55:06
hmmm..this may be a problem of the driver itself-try the evolution driver as mentioned here: http://helppage.3dfx.sk/#cardtable
btw,have you tried running the card in single chip mode? maybe its a SLI problem.. |
Title: Re: Screen corruption artifacts at 1600x1200 in Glide mode with Post by Tim on 08.01.09 at 11:21:14
I don't think it's a driver problem, I think it's hardware related, driver issues would have a hard time doing that.
|
Title: Re: Screen corruption artifacts at 1600x1200 in Glide mode with Post by ps47 on 08.01.09 at 12:30:16
try running the card in single chip mode then.
|
Title: Re: Screen corruption artifacts at 1600x1200 in Glide mode with Post by Tim on 08.01.09 at 13:56:57 ps47 wrote on 08.01.09 at 12:30:16:
Good point. |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |