3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Is the MSI K7T266 Pro-R with Voodoo 5 comp? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1172056435 Message started by dirk81 on 21.02.07 at 12:13:55 |
Title: Is the MSI K7T266 Pro-R with Voodoo 5 comp? Post by dirk81 on 21.02.07 at 12:13:55
It's an older VIA Board with a AGP-Pro on it. Where can I see if it is compatible or not?
Bought: 10/2001 Chipset: Via KT 266 MSI Number: MS6380 AGP: AGP Pro |
Title: Re: Is the MSI K7T266 Pro-R with Voodoo 5 comp? Post by Eye-Q on 21.02.07 at 12:20:16
Boards with KT266-chipset are generally compatible, just as all earlier VIA-chipsets.
Only the KT333 is critical since the later revisions of the KT333 (called KT333CE and KT333CF) utilize the southbridge of the KT400-chipset (VT8235) so they can't provide 3.3V AGP-voltage. AGP Pro hasn't anything to do with that, it's only an extension for workstation graphics cards with some more voltagerails so the cards get more power. |
Title: Re: Is the MSI K7T266 Pro-R with Voodoo 5 comp? Post by NitroX infinity on 21.02.07 at 13:54:57 |
Title: Re: Is the MSI K7T266 Pro-R with Voodoo 5 comp? Post by TM30 on 21.02.07 at 15:36:17 wrote on 21.02.07 at 12:20:16:
My Epox 8K5A3+ has also the VT8235 Southbridge but it freatures 3,3V AGP. I can see it in the hardware monitoring after boot and in the USDM Tools in windows! |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |