Quote:


Sure? It has black PCB too

Skywell Technology Magic3D Plus1 (4 MB):

If you are able to solder RAM-chips it's possible, yes, but then you can upgrade the 8-MB-Voodoo 2-cards to 12 MB, too.

missing some Voodoo5 6000 models too NitroX Infinity

Rev.A0 0700 Blank PCB

Rev.A0 0700
Rev.A1 1500
Rev.A3 3400
Rev.A   3900

and the the the 2 6000 you listed are the Rev.A2 2600 and Rev.A 3700

do remember every Voodoo5 6000 has it's differences, different parts like the extra caps on the Rev.A3 3400 and Rev.A 3900 models and the 5.4ns SDRAM on the Rev.A1 1500 and Rev.A3 3400 models the Intel Bridge chips on the Rev.A0 0700 and Rev.A1 1500 models the 6ns SDRAM on the Rev.A0 0700, Rev. A 3700 and Rev.A 3900 models and the 5.5ns SDRAM on the Rev.A2 2600 models

So if you were planing to list different Voodoo5 6000's might as well list them all the differences are visable

nice one! so you can put in 125Mhz RAM easily and OC it to hell 

at my Voodoo system comes a vga peep and the boot is normal but no picture on the monitor



but with a 2nd "T" rush i get the BIOS

i see this card last year in german VoodooAlert  forums

i think its buils shortly after 3dfx buys STB and they still builds the normal STB lineup but with 3dfx print