3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> need some help here MAC 5500 to PC. http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1156889938 Message started by Obi-Wan_Kenobi on 30.08.06 at 00:18:58 |
Title: Re: need some help here MAC 5500 to PC. Post by Obi-Wan_Kenobi on 30.08.06 at 02:44:32
well got some good news everyone :)
The card is in perfect condition and it's working with Bios 1.18DVI So I found out that the Rev.A1 2900's need PC Bios 1.11DVI to opperate perfectly and the Rev.A1 3100's need PC Bios 1.18DVI to opperate perfectly :) mayby that was the change between those 2 Rev's :) It's 02:39 now and I finally completed the VMAC 5500 Flashing missions the Rev.A1 2900 Prototype with PC Bios 1.11 DVI and the Rev.A1 3100 with PC Bios 1.18DVI both work perfectly! anyways what driver would you reccomend under 98SE ? just driver no control panel, it's that I ask this because the VMAC 5500 is my VGA2, or is Win2K/XP needed for this feature only? @ Gary I thank you for the extra help hehe :) |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |