| 3dfx Archive | |
|
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> sli and voodoo5 agp/pci http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1228553983 Message started by visiteur on 06.12.08 at 10:59:43 |
|
|
Title: sli and voodoo5 agp/pci Post by visiteur on 06.12.08 at 10:59:43
Hello
i wonder if it possible, with an voodoo5 PCI and an other in AGP to link them with SLI? Thanks |
|
Title: Re: sli and voodoo5 agp/pci Post by RaverX on 06.12.08 at 11:16:29
No. You can't link 2 V5 in SLI, not even if they are both PCI.
|
|
Title: Re: sli and voodoo5 agp/pci Post by FalconFly on 06.12.08 at 11:17:05
That is not possible, as the Voodoo5 retail cards do not have any means or preparation to act in SLI with other VSA-100 retail cards.
The only solution (apart from a Voodoo5 6000) is a Quantum3D Aalchemy System, which was designed to afford scalable SLI in higher numbers. Even if it worked technically, the AGP upstream- and PCI general bandwidth would not suffice by far to allow any reasonable SLI performance. -- edit -- too slow ;) |
|
Title: Re: sli and voodoo5 agp/pci Post by visiteur on 06.12.08 at 11:37:50
Hello
first thanks for you very fast reply second after a quick research i wonder if Quantum3D Aalchemy System can be use for gaming? thanks ps:i read it was more for 3D scene than gaming |
|
Title: Re: sli and voodoo5 agp/pci Post by exxe on 06.12.08 at 12:22:56
AAlchemy have only openGL and Glide drivers
so no D3D game will run on it but quake3 works fine |
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |