3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Help V3 PICASSO 960 PCI
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1084985624

Message started by osckhar on 13.05.04 at 23:41:46

Title: Help V3 PICASSO 960 PCI
Post by osckhar on 13.05.04 at 23:41:46
Hi at all,  ;D

V3 PICASSO 960 PCI SGRAM MEM 5ns  :o


Well, I have the next problem. This card is only for MAC. Then, I have flashed the bios and I have utilized V3 PCI SGRAM BIOS but the card doesn't work.
Some advice? Perhaps is not possible to utilize it under PC...  :-/

Regards,
Oscar

Title: Re: Help V3 PICASSO 960 PCI
Post by FalconFly on 13.05.04 at 23:45:36
Hm, I do have the same Card (Villagetronic MP960), but I never flashed it of course...

Since this is quite a special design (unique PCB layout), I doubt a PC Bios could work on it.

I hope you have retained the original Bios as a File.

Anyway, you could only try to re-flash it over again, using a Velocity or V3-SGRAM Bios, for example.

Title: Re: Help V3 PICASSO 960 PCI
Post by osckhar on 13.05.04 at 23:53:25
Thanks FalconFly :D

The card is very nice and genuine  ;D. Mem 5ns, 2 IN (perhaps Tv-Out) and PCB blue...  ;D


Quote:
Anyway, you could only try to re-flash it over again, using a Velocity or V3-SGRAM Bios, for example.

I am going to try that... ;)

Regards,
Oscar

Title: Re: Help V3 PICASSO 960 PCI
Post by osckhar on 14.05.04 at 00:18:00
Bad News,

The card not want to run... :(

Somebody can make a mod with the original bios V3 PCI SGRAM for the Villagetronic MP960 PCI under PC?

Regards,
Oscar

Title: Re: Help V3 PICASSO 960 PCI
Post by Lecram25 on 14.05.04 at 00:33:16

wrote on 14.05.04 at 00:18:00:
Bad News,

The card not want to run... :(

Somebody can make a mod with the original bios V3 PCI SGRAM for the Villagetronic MP960 PCI under PC?

Regards,
Oscar



lol, sure. I'll get seb on it ASAP.



/sarcasm


Sorry to say, but you're only 2-3 years late.  ::)

Title: Re: Help V3 PICASSO 960 PCI
Post by DenisF on 14.05.04 at 01:03:35
This isn't really helpful, but that card looks sooo cute  ;D

Title: Re: Help V3 PICASSO 960 PCI
Post by FalconFly on 14.05.04 at 01:38:59
Indeed not very helpful Lecram ::)

Anyway, from what I recall from memory, I've actually never heard of anyone successfully flashing/using a Mac Voodoo3 in a PC...

I guess that's the reason :-/

Title: Re: Help V3 PICASSO 960 PCI
Post by paulpsomiadis on 14.05.04 at 02:20:00
Heh, VERY nice! :o ;D

Also found THESE after a short search... :P

http://www.xlr8yourmac.com/Graphics/MP960/      - VillageTronic Mac VT960 Review

http://www.villagetronic.com/e_su_cl_down.html      - Villagetronic DL support page

Good luck with the card! ;)

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.