3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> PIII & V6k http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1104336456 Message started by osckhar on 29.12.04 at 15:24:58 |
Title: PIII & V6k Post by osckhar on 29.12.04 at 15:24:58
Hi to everybody, ;D
Well, I would like know what Board for PIII with ChipSet VIA is totally compatible with the V6k? Regards, Oscar |
Title: Re: PIII & V6k Post by Obi-Wan_Kenobi on 29.12.04 at 20:34:38
Well I know which one is very good
It's for dual Pentium!!!/EB 1Ghz Socket 370: ABiT VP6 2x Intel Pentium!!! Socket 370 up to 1Ghz support 4x 512Mb PC-133 Supported ECC /Reg also supported but not recconmended VIA Apollo Pro 133A chipset HighPoint 370 ATA 100 Raid I've got that board with 2x P3/EB 1Ghz and 4x 256MB PC-133 SDRAM. It is very stable also. Omega _Supreme & Hank says it's chipset is old enough to support even a V56K Rev.A1 1500 with Intel Bridge chip ;) Friendly Regards, Obi-Wan Kenobi. |
Title: Re: PIII & V6k Post by omega_supreme on 29.12.04 at 23:21:10
Yes I agree with Obi-Wan_Kenobi here. This board looks very promising but you need it for final revision right? Like I said on 3dfxzone, just be be sure you should ask Rolo01. He was using a P3 board until he upgraded to 2.8 Ghz P4. Its a pitty that voodoo6000.com is offline they had a list of fully supported mainboards. Maybe they had a P3 board too.
|
Title: Re: PIII & V6k Post by osckhar on 30.12.04 at 02:09:11
Thanks to both!
Quote:
Well, somebody has tried this board under v6k? It seems to be a nice board! Quote:
Last revision= Update final bios, right? Quote:
If I am not wrong, Roland utilized a ASUS P3BF with one PentiumIII-S 1400GHz and Celeron 1400GHz too. He also is utilizing a ABIT SA7 PIV 2.8GHz. Quote:
Yes! We will see if MLogicalMadness update of new the site! Regards, Oscar |
Title: Re: PIII & V6k Post by omega_supreme on 30.12.04 at 09:58:36
Hi Oschar,
This board has not been tested yet. Obi-Wan_Kenobi owns this board and we are planning to test the 6K on it someday. I hope you can find the right mainboard soon. Im very interested, so if you do find one please report it :) |
Title: Re: PIII & V6k Post by Obi-Wan_Kenobi on 30.12.04 at 18:20:42
well yes that's true, I'm sorry I was alittle mixxed up then hehe, indeed we are planed to do so. Anyway the ABIT VH6-II Socket370 is also a great VIA based mobo for Intel Pentium3 ;)
and there is also this one :) SMP ASUS CUV4X-DLS motherboard (VIA Apollo Pro 133A) The ASUS also support Dual Pentium3 EB as you can clearly see, but it also has a nice Adeptec Dual 160 SCSI RAID controller onboard :D |
Title: Re: PIII & V6k Post by Kyon CoraeL on 31.12.04 at 22:38:24
I had an abit VP6, it had many problems. first some functions weren't working properly ( I can't remember, I think it was temp sensor or something) then after I got it back after a week it stopped working. finally the third time I got mine back from RMA it was fine but after a year it burnt out. maybe because it was being used as a server and was left on alot but I didn't think there was enough stress to burn out.
|
Title: Re: PIII & V6k Post by liquid-x on 16.02.05 at 13:16:54
kick..
I have a Aopen AX34 pro and it works very well with my Voodoo5 5500 AGP.. Only thing I need is some pc133 memory.. Now working on pc100.. :s |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |