Welcome, Guest. Please
Login
Home
Help
Search
Login
3dfx Archive
›
3dfx Section
›
Tech Talk
› How Clean Is Your GPU?
(Moderators: gdonovan, FalconFly, NitroX infinity)
‹
Previous Topic
|
Next Topic
›
Pages:
1
2
How Clean Is Your GPU? (Read 867 times)
janskjaer
Ex Member
How Clean Is Your GPU?
09.01.05 at 20:56:01
What would be the best cleaning agent for a GPU?
I'm wanting to remove a stock fan and clean the GPU, but what would be best?
And what tool should I clean it with? Don't wanna go using something like wire wool or a steel toothed brush. Any particular cloth?
Back to top
IP Logged
VDX
Ex Member
Re: How Clean Is Your GPU?
Reply #1 -
09.01.05 at 21:23:55
since ive always frozen the card before removal of heatsink most of the glue comes off in removal, what doesnt ive always taken off with razor blade, always has come out great for me. the cold makes the glue brittle.
Back to top
IP Logged
gamma742
God Member
Offline
3Dfx Gamer
Posts: 1668
San Diego, CA USA
Gender:
Re: How Clean Is Your GPU?
Reply #2 -
09.01.05 at 21:45:49
Same process I use. Some will then lap the GPU and new heatsink but I never go to that extreme, just add a better heatsink and fan
Back to top
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...
IP Logged
NitroX infinity
YaBB Moderator
Offline
Posts: 1936
The Netherlands
Gender:
Re: How Clean Is Your GPU?
Reply #3 -
09.01.05 at 21:48:29
When I replaced the heatsinks on my V5 I cleaned the epoxy of with a sharp little knife (stanley-knife, don't know how you call it). Carefully scraping off the remains.
After that I used nailpolish-remover and those little sticks with cotton on each end (quetips?) to remove the rest.
Back to top
My Blog
IP Logged
gamma742
God Member
Offline
3Dfx Gamer
Posts: 1668
San Diego, CA USA
Gender:
Re: How Clean Is Your GPU?
Reply #4 -
12.01.05 at 03:50:26
To clean it, I used paint thinner"100% Mineral Spirits" I have used nail polish remover but it seemed to leave a residue.
Back to top
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...
IP Logged
janskjaer
Ex Member
Re: How Clean Is Your GPU?
Reply #5 -
13.01.05 at 11:23:21
Cool!
These are usually the best steps to take I guess.
Stanley knife blades are sharp enough to take the finest grain of residue off anything! This will leave good contact for the next heatsink going on the GPU.
Won't nail polish remover/paint thinner harm the surface of the GPU in any way?
Back to top
IP Logged
gamma742
God Member
Offline
3Dfx Gamer
Posts: 1668
San Diego, CA USA
Gender:
Re: How Clean Is Your GPU?
Reply #6 -
13.01.05 at 23:50:11
No that's an old trick back in the early Athlon days when we used to connect the 4 L1 bridges to unlock the CPU. You had to have a steady hand along with the auto rear window defroster repair kit.
First time I did it I cut off all but 3 brissels on the brush. 2 shots of rum to steady the hand and start painting. Took me 3 trys. Each time you mess up you have to clean the CPU off with the paint thinner and start over.
My 750 Duron ran great a 933MHz once unlocked. I could get it to 950 9.5 X 100 but it benchmarked better @ 933MHz by 7 X 133. It used to beat the crap out of my buddy's PIII 800
Remember back then he paid over 700 USD and my Duron was 125 USD 8)
These solvents will not harm your GPU/CPU.
Back to top
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...
IP Logged
paulpsomiadis
God Member
Offline
-=3Dfx still rox!=-
Posts: 2011
Newcastle U.K.
Gender:
Re: How Clean Is Your GPU?
Reply #7 -
14.01.05 at 01:08:37
Indeed, best steps are...
1. Freeze card
2. Remove from freezer and quickly 'pop' off the heatsink (should take most of the glue with it)
3. Scrape excess remaining glue with a stanley knife.
4. Clean with alcohol solution
Nuff said! 8)
Back to top
-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
IP Logged
LuxKiller65
God Member
Offline
Posts: 680
Luxembourg
Gender:
Re: How Clean Is Your GPU?
Reply #8 -
16.01.05 at 13:04:42
Anybody got pictures maybe?
Because I don't want to screw up my cards...
Back to top
IP Logged
janskjaer
Ex Member
Re: How Clean Is Your GPU?
Reply #9 -
21.01.05 at 18:55:35
I don't wanna take the markings off of the 3dfx GPU's (the white text).
Won't alcohol/paint thinner/nail polish remover, rub the markings away?
Back to top
IP Logged
paulpsomiadis
God Member
Offline
-=3Dfx still rox!=-
Posts: 2011
Newcastle U.K.
Gender:
Re: How Clean Is Your GPU?
Reply #10 -
21.01.05 at 23:49:15
Most of the markings will come off anyhow when you remove the old heatsinks!
It's pretty unavoidable that you'll end up with sort of 3/4 of a 3Dfx logo - as some of it WILL be pulled off by the remaining glue on the old heatsink!
Back to top
-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
IP Logged
janskjaer
Ex Member
Re: How Clean Is Your GPU?
Reply #11 -
06.06.05 at 10:31:40
Forgot to ask one point on this question.
How long does a card get left for in the freezer? ???
What is the minimum time (no less than) and maximum time (no more than) duration in the freezer?
Oh, and would it be best to stick the card in an anti-static bag, and tape it shut?
Back to top
IP Logged
janskjaer
Ex Member
Re: How Clean Is Your GPU?
Reply #12 -
06.06.05 at 10:34:14
Oh, and please rate your top 3 alcohol solutions for removing persistent epoxy/residue from the chips.
1. Nail Polish Remover perhaps?
2. Do you prefer white spirits?
3. Or a bottle of Jack Daniels?
State your top 3.
Back to top
IP Logged
gamma742
God Member
Offline
3Dfx Gamer
Posts: 1668
San Diego, CA USA
Gender:
Re: How Clean Is Your GPU?
Reply #13 -
06.06.05 at 21:46:29
You still haven't popped that heatsink off. Man that was about 6 mo. ago
I have used both nail polish remover and paint thinner (mineral spirits). I like the paint thinner better because it does not leave a residue. I pick up a quart (.95 liter) at the local hardware store, the brand is "Parks" Parks Corporation, Somerset MA 02726 They have a toll free number but I don't know if it's international 800-225-8543. It is 100% Mineral Spirits.
(Use in a well ventilated area)
Back to top
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...
IP Logged
paulpsomiadis
God Member
Offline
-=3Dfx still rox!=-
Posts: 2011
Newcastle U.K.
Gender:
Re: How Clean Is Your GPU?
Reply #14 -
07.06.05 at 00:46:10
Seriously man, just GO for it!
1. Leave in freezer inside a cheap carrier bag (sealed) for about a couple of hours (2-3 hrs minimum) or overnight for best results.
2. Remove, split bag with sharp knife and use a small screwdriver to QUICKLY and CAREFULLY "pop" the heatsink off.
3. Use white spirit or (for better results) Maplin cleaning fluid (white cannister with yellow label) to remove gunk.
4. Clean up with a sharp knife or fine grit sandpaper.
END!
Back to top
«
Last Edit: 07.06.05 at 00:46:47 by paulpsomiadis
»
-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
IP Logged
Pages:
1
2
‹
Previous Topic
|
Next Topic
›
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
General Section
- News
- General Discussion
3dfx Section
- 3dfx Drivers
- Games
- Tech Talk ««
This & That
- This & That
- Marketplace
- Twilight Zone
« Home
‹ Board
Top of this page
3dfx Archive
» Powered by
YaBB 2.4
!
YaBB
© 2000-2009. All Rights Reserved.