3dfx Archive - Quantum3D 100SB-4400 vga problem

Menkau_ra

YaBB Newbies

Offline

Posts: 37
USA
Gender: male

Quantum3D 100SB-4400 vga problem
02.01.10 at 18:21:54

I just got my first 100SB-4400 from ebay! I really love Quantum3D products, like everybody else here;)
But the seller told me that vga doesn't work. TV outs are perfect, I played already. The card is in a great shape too. So what could be with the vga? Maybe it needs a pass-thru cable to work?
I saw somebody had the same card here with the same problem. Maybe it is the same card also?

Back to top

IP Logged

goriath

God Member

Offline

Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male

Re: Quantum3D 100SB-4400 vga problem
Reply #1 - 02.01.10 at 20:03:58

Menkau_ra wrote on 02.01.10 at 18:21:54:

I just got my first 100SB-4400 from ebay! I really love Quantum3D products, like everybody else here;)
But the seller told me that vga doesn't work. TV outs are perfect, I played already. The card is in a great shape too. So what could be with the vga? Maybe it needs a pass-thru cable to work?
I saw somebody had the same card here with the same problem. Maybe it is the same card also?

Yeah, probably you guessed it

Back to top

OLD SCHOOL: Because it was done right the first time

IP Logged

Tim

God Member

Offline

Posts: 1065
Gender: male

Re: Quantum3D 100SB-4400 vga problem
Reply #2 - 03.01.10 at 01:01:51

Menkau_ra wrote on 02.01.10 at 18:21:54:

I just got my first 100SB-4400 from ebay! I really love Quantum3D products, like everybody else here;)
But the seller told me that vga doesn't work. TV outs are perfect, I played already. The card is in a great shape too. So what could be with the vga? Maybe it needs a pass-thru cable to work?
I saw somebody had the same card here with the same problem. Maybe it is the same card also?

I think you are referring to 2000lfd's card? That's Gary Donovan, a mod here on Falconfly.

Most likely something is broken on a hardware level. No telling what it can be.

Back to top

IP Logged

gdonovan

YaBB Administrator

Offline

Infernal Collector

Posts: 2361

Re: Quantum3D 100SB-4400 vga problem
Reply #3 - 03.01.10 at 15:59:14

Tim wrote on 03.01.10 at 01:01:51:

I think you are referring to 2000lfd's card? That's Gary Donovan, a mod here on Falconfly.

Most likely something is broken on a hardware level. No telling what it can be.

I suspect the card has a custom "firmware" in the xlinx chip so it is limiting it to TV output only, as to why I'm not sure.

I do have the xlinx programmer and documentaion but never got around to tinkering with it, too much on my plate.

Back to top

Rampage is alive!

IP Logged

Menkau_ra YaBB Newbies Offline Posts: 37 USA Gender:	Re: Quantum3D 100SB-4400 vga problem Reply #4 - 03.01.10 at 17:56:29 That's what I thought! Do you know where I can buy this xlinx programmer? There is nothing on ebay. And where I can find the original firmware?
Back to top	« Last Edit: 03.01.10 at 17:58:16 by Menkau_ra » IP Logged

Menkau_ra

YaBB Newbies

Offline

Posts: 37
USA
Gender: male

Re: Quantum3D 100SB-4400 vga problem
Reply #5 - 04.01.10 at 00:32:05

gdonovan wrote on 03.01.10 at 15:59:14:

I suspect the card has a custom "firmware" in the xlinx chip so it is limiting it to TV output only, as to why I'm not sure.

I do have the xlinx programmer and documentaion but never got around to tinkering with it, too much on my plate.

You was right! I can see that some one tried to put a programmer on all chips, xilinx one of them. But why do you think it is xilinx causes the problem? I am thinking to buy a Willem programmer, but will I need to buy a special converter to this chip?

Back to top

IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Quantum3D 100SB-4400 vga problem Reply #6 - 04.01.10 at 01:40:45 Menkau_ra wrote on 04.01.10 at 00:32:05: But why do you think it is xilinx causes the problem? Quantum3D use the xilinx chips to control what the board will and will not do, they also use the chip as a "key" for certain locked programs.
Back to top	Rampage is alive! IP Logged

Menkau_ra YaBB Newbies Offline Posts: 37 USA Gender:	Re: Quantum3D 100SB-4400 vga problem Reply #7 - 04.01.10 at 02:01:08 So what programmer I need to buy?
Back to top	IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Quantum3D 100SB-4400 vga problem Reply #8 - 04.01.10 at 02:52:57 Menkau_ra wrote on 04.01.10 at 02:01:08: So what programmer I need to buy? I'll see if I still have mine, it is yours for what it cost me.
Back to top	Rampage is alive! IP Logged

Menkau_ra YaBB Newbies Offline Posts: 37 USA Gender:	Re: Quantum3D 100SB-4400 vga problem Reply #9 - 05.01.10 at 16:31:39 gdonovan wrote on 04.01.10 at 02:52:57: I'll see if I still have mine, it is yours for what it cost me. And how much did it cost you?
Back to top	« Last Edit: 05.01.10 at 23:48:28 by Menkau_ra » IP Logged

Menkau_ra YaBB Newbies Offline Posts: 37 USA Gender:	Re: Quantum3D 100SB-4400 vga problem Reply #10 - 10.01.10 at 00:21:19 Should it be a 44-pin head on a programmer? Or I have to uses a 6-pin connector near the xilinx?
Back to top	IP Logged

Menkau_ra YaBB Newbies Offline Posts: 37 USA Gender:	Re: Quantum3D 100SB-4400 vga problem Reply #11 - 20.01.10 at 17:59:43 Menkau_ra wrote on 05.01.10 at 16:31:39: I'll see if I still have mine, it is yours for what it cost me. so do you still have it?
Back to top	« Last Edit: 20.01.10 at 18:04:13 by Menkau_ra » IP Logged

Menkau_ra YaBB Newbies Offline Posts: 37 USA Gender:	Re: Quantum3D 100SB-4400 vga problem Reply #12 - 21.01.10 at 19:43:06 The two daughterboards for this board, what does they do?
Back to top	IP Logged

Menkau_ra YaBB Newbies Offline Posts: 37 USA Gender:	Re: Quantum3D 100SB-4400 vga problem Reply #13 - 22.01.10 at 18:37:51 gdonovan, if you don't have a programmer no more, can you tell me, please, what xilinx programmer exectily I am looking for? There are many different ones on ebay. I really want to make this card working.
Back to top	IP Logged

gdonovan

YaBB Administrator

Offline

Infernal Collector

Posts: 2361

Re: Quantum3D 100SB-4400 vga problem
Reply #14 - 22.01.10 at 23:22:08

Menkau_ra wrote on 22.01.10 at 18:37:51:

gdonovan,
if you don't have a programmer no more, can you tell me, please, what xilinx programmer exectily I am looking for? There are many different ones on ebay.
I really want to make this card working.

I do have it but since you have the board on ebay thought you were disinterested.

Back to top

Rampage is alive!

IP Logged

	Welcome, Guest. Please Login
	News: Forum Registration Status : Closed